ErrorFindly
E152Bosch Microwave

Bosch Microwave Error E152 – Meaning, Causes & How to Fix

The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters.

Real-World Causes

  • 1Magnetron failure
  • 2Door switch malfunction
  • 3High voltage diode or capacitor failure
  • 4Control board malfunction
  • 5Turntable motor failure
  • 6Thermal fuse blown due to overheating
  • 7Touchpad or membrane switch failure

Symptoms

Look for these signs to confirm error E152 on your Bosch Microwave:

  • Microwave not heating food
  • Unit runs but food stays cold
  • Sparking inside the cavity
  • Turntable not rotating
  • Display not working or showing error
  • Door won't close or open properly

DIY Fix (Safe)

  1. 1Check that the door closes securely and latches click
  2. 2Ensure the turntable is properly seated on its support
  3. 3Reset the appliance by unplugging for 5 minutes
  4. 4Clean the interior, door seal, and waveguide cover
  5. 5Check the power outlet with another device
  6. 6Do not run the microwave empty — this can cause damage

Professional Action Required

  1. 1Test magnetron for proper operation (high voltage — professional only)
  2. 2Check high voltage diode, capacitor, and transformer
  3. 3Test door switches for continuity
  4. 4Inspect control board and replace if faulty
  5. 5Replace thermal fuse if blown

Additional Context

Power Level
Error may occur at specific power levels or during certain functions
Door Safety
Microwave safety interlocks prevent operation with door open
Sensor Issues
Humidity sensor faults may affect auto-cook programs

Frequently Asked Questions

What does Bosch Microwave error E152 mean?
The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters.
What causes Bosch Microwave E152 error?
Common causes include: Magnetron failure. Door switch malfunction. High voltage diode or capacitor failure. Door switch and heating component failures are common microwave issues.
How do I fix Bosch Microwave error E152?
Start with these steps: Check that the door closes securely and latches click. Ensure the turntable is properly seated on its support. WARNING: Never attempt to repair internal high-voltage components yourself — contact a qualified technician.

Related Error Codes

Other Bosch Microwave Errors

E787The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E688The appliance control system detected a condition indicating heater circuit fault – heating element is not operating correctly
E860The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E855The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E530The appliance control system detected a condition indicating temperature sensor fault – thermistor readings are outside expected range
E154The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E319The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E220The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters

About the Author

Technical Review Team

Reviewed by certified technicians with 10+ years of Bosch repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.