ErrorFindly
E347Bosch Washer

Bosch Washer Error E347 – Meaning, Causes & How to Fix

The appliance control system detected a condition indicating motor control error – the controller cannot communicate with drive motor.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance control system detected a condition indicating motor control error – the controller cannot communicate with drive motor.

Real-World Causes

  • 1Sensor damaged by moisture or mineral buildup
  • 2Control board failure
  • 3Faulty inlet valve solenoid
  • 4Water supply faucets are not fully open
  • 5Kinked or bent inlet hoses restricting water flow

Symptoms

Look for these signs to confirm error E347 on your Bosch Washer:

  • Error displayed at the start of a cycle
  • Machine pauses and displays the error
  • Unusual clicking sounds as relays activate
  • Appliance stops mid-cycle

DIY Fix (Safe)

  1. 1Verify household water and power supply conditions
  2. 2Inspect hoses and filters for blockages
  3. 3Restart appliance after disconnecting power for 5 minutes
  4. 4Clean filters and sensors if accessible
  5. 5Run diagnostic mode if available

Professional Action Required

  1. 1Test valves, sensors, and motors with a multimeter
  2. 2Inspect wiring harness and connectors
  3. 3Replace defective pumps, motors, sensors, or valves
  4. 4Inspect control board relays
  5. 5Replace electronic control board if failure is confirmed

Additional Context

Load Type
Any load type
Drain Related
Depends on cycle stage
Sensor Issues
Sensors may give incorrect readings if hoses are blocked

Frequently Asked Questions

What does Bosch Washer error E347 mean?
The appliance control system detected a condition indicating motor control error – the controller cannot communicate with drive motor.
What causes Bosch Washer E347 error?
Common causes include: Sensor damaged by moisture or mineral buildup, Control board failure, Faulty inlet valve solenoid.
How do you fix Bosch Washer error E347?
Start with these DIY steps: Verify household water and power supply conditions. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.

Related Error Codes

Other Bosch Washer Errors

E878The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E1The appliance control system detected a condition indicating heater circuit fault – heating element is not operating correctly
E961The appliance control system detected a condition indicating heater circuit fault – heating element is not operating correctly
E238The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E531The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E299The appliance control system detected a condition indicating motor control error – the controller cannot communicate with drive motor
E34The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E167The appliance control system detected a condition indicating motor control error – the controller cannot communicate with drive motor

About the Author

Technical Review Team

Reviewed by certified technicians with 10+ years of Bosch repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.