ErrorFindly
E442Miele Dishwasher

Miele Dishwasher Error E442 – Meaning, Causes & How to Fix

The appliance control system detected a condition indicating overflow protection triggered – water level exceeded safe limit.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance control system detected a condition indicating overflow protection triggered – water level exceeded safe limit.

Real-World Causes

  • 1Clogged inlet filter screens
  • 2Blocked drain pump or hose
  • 3Loose wiring harness
  • 4Kinked or bent hoses restricting water flow
  • 5Low water pressure in plumbing system

Symptoms

Look for these signs to confirm error E442 on your Miele Dishwasher:

  • Clicking sounds as relays activate
  • Error appears at start of cycle
  • Machine pauses and displays error
  • Slow filling or draining

DIY Fix (Safe)

  1. 1Verify household water and power supply
  2. 2Inspect hoses and filters for blockages
  3. 3Restart appliance after disconnecting power for 5 minutes
  4. 4Clean accessible filters and sensors
  5. 5Run diagnostic mode if available

Professional Action Required

  1. 1Test valves, sensors, and motors with multimeter
  2. 2Inspect wiring harness and connectors
  3. 3Replace defective pumps, motors, or sensors
  4. 4Check control board relays
  5. 5Replace electronic control board if failure confirmed

Additional Context

Load Type
Any load type
Drain Related
Depends on cycle stage
Sensor Issues
Incorrect readings possible if sensors are blocked

Frequently Asked Questions

What does Miele Dishwasher error E442 mean?
The appliance control system detected a condition indicating overflow protection triggered – water level exceeded safe limit.
What causes Miele Dishwasher E442 error?
Common causes include: Clogged inlet filter screens, Blocked drain pump or hose, Loose wiring harness.
How do you fix Miele Dishwasher error E442?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.

Related Error Codes

Other Miele Dishwasher Errors

E342The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E54The appliance control system detected a condition indicating communication error – internal control boards lost connection
E98The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E243The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E118The appliance control system detected a condition indicating overflow protection triggered – water level exceeded safe limit
E688The appliance control system detected a condition indicating overflow protection triggered – water level exceeded safe limit
E804The appliance control system detected a condition indicating overflow protection triggered – water level exceeded safe limit
E954The appliance control system detected a condition indicating overflow protection triggered – water level exceeded safe limit

About the Author

Technical Review Team

Reviewed by certified technicians with 10+ years of Miele repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.