E267Miele Washer
Miele Washer Error E267 – Meaning, Causes & How to Fix
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
Medium Severity
Low
Medium
High
Critical
Expert Verified
Reviewed by a Certified Electrical Engineer & Licensed Technician
Ad Space – header
Official Meaning
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
Real-World Causes
- 1Kinked or bent hoses restricting water flow
- 2Faulty valve solenoid
- 3Sensor damaged by moisture or mineral buildup
- 4Electronic control board failure
- 5Loose wiring harness
Symptoms
Look for these signs to confirm error E267 on your Miele Washer:
- Error appears at start of cycle
- Machine pauses and displays error
- Appliance stops mid-cycle
- Slow filling or draining
Ad Space – mid-content
DIY Fix (Safe)
- 1Verify household water and power supply
- 2Inspect hoses and filters for blockages
- 3Restart appliance after disconnecting power for 5 minutes
- 4Clean accessible filters and sensors
- 5Run diagnostic mode if available
Professional Action Required
- 1Test valves, sensors, and motors with multimeter
- 2Inspect wiring harness and connectors
- 3Replace defective pumps, motors, or sensors
- 4Check control board relays
- 5Replace electronic control board if failure confirmed
Ad Space – after-fix
Additional Context
Frequently Asked Questions
What does Miele Washer error E267 mean?
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
What causes Miele Washer E267 error?
Common causes include: Kinked or bent hoses restricting water flow, Faulty valve solenoid, Sensor damaged by moisture or mineral buildup.
How do you fix Miele Washer error E267?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.
Related Error Codes
Other Miele Washer Errors
E346The appliance control system detected a condition indicating drain system failure – water cannot be removed properly
E84The appliance control system detected a condition indicating motor control error – the controller cannot communicate with drive motor
E187The appliance control system detected a condition indicating drain system failure – water cannot be removed properly
E409The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E77The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E930The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E625The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E897The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
About the Author
Technical Review Team
Reviewed by certified technicians with 10+ years of Miele repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.