ErrorFindly
E948Miele Washer

Miele Washer Error E948 – Meaning, Causes & How to Fix

The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked.

Real-World Causes

  • 1Kinked or bent hoses restricting water flow
  • 2Faulty valve solenoid
  • 3Blocked drain pump or hose
  • 4Loose wiring harness
  • 5Water supply valves not fully open

Symptoms

Look for these signs to confirm error E948 on your Miele Washer:

  • Error appears at start of cycle
  • Machine pauses and displays error
  • Appliance stops mid-cycle
  • Slow filling or draining

DIY Fix (Safe)

  1. 1Verify household water and power supply
  2. 2Inspect hoses and filters for blockages
  3. 3Restart appliance after disconnecting power for 5 minutes
  4. 4Clean accessible filters and sensors
  5. 5Run diagnostic mode if available

Professional Action Required

  1. 1Test valves, sensors, and motors with multimeter
  2. 2Inspect wiring harness and connectors
  3. 3Replace defective pumps, motors, or sensors
  4. 4Check control board relays
  5. 5Replace electronic control board if failure confirmed

Additional Context

Load Type
Any load type
Drain Related
Depends on cycle stage
Sensor Issues
Incorrect readings possible if sensors are blocked

Frequently Asked Questions

What does Miele Washer error E948 mean?
The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked.
What causes Miele Washer E948 error?
Common causes include: Kinked or bent hoses restricting water flow, Faulty valve solenoid, Blocked drain pump or hose.
How do you fix Miele Washer error E948?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.

Related Error Codes

Other Miele Washer Errors

E346The appliance control system detected a condition indicating drain system failure – water cannot be removed properly
E84The appliance control system detected a condition indicating motor control error – the controller cannot communicate with drive motor
E187The appliance control system detected a condition indicating drain system failure – water cannot be removed properly
E409The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E417The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E777The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E576The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E430The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked

About the Author

Technical Review Team

Reviewed by certified technicians with 10+ years of Miele repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.