ErrorFindly
E362Samsung Dishwasher

Samsung Dishwasher Error E362 – Meaning, Causes & How to Fix

The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.

Real-World Causes

  • 1Clogged inlet filter screens
  • 2Electronic control board failure
  • 3Water supply valves not fully open
  • 4Loose wiring harness
  • 5Kinked or bent hoses restricting water flow

Symptoms

Look for these signs to confirm error E362 on your Samsung Dishwasher:

  • Slow filling or draining
  • Error appears at start of cycle
  • Machine pauses and displays error
  • Appliance stops mid-cycle

DIY Fix (Safe)

  1. 1Verify household water and power supply
  2. 2Inspect hoses and filters for blockages
  3. 3Restart appliance after disconnecting power for 5 minutes
  4. 4Clean accessible filters and sensors
  5. 5Run diagnostic mode if available

Professional Action Required

  1. 1Test valves, sensors, and motors with multimeter
  2. 2Inspect wiring harness and connectors
  3. 3Replace defective pumps, motors, or sensors
  4. 4Check control board relays
  5. 5Replace electronic control board if failure confirmed

Additional Context

Load Type
Any load type
Drain Related
Depends on cycle stage
Sensor Issues
Incorrect readings possible if sensors are blocked

Frequently Asked Questions

What does Samsung Dishwasher error E362 mean?
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
What causes Samsung Dishwasher E362 error?
Common causes include: Clogged inlet filter screens, Electronic control board failure, Water supply valves not fully open.
How do you fix Samsung Dishwasher error E362?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.

Related Error Codes

Other Samsung Dishwasher Errors

4CWater supply error – the dishwasher is not receiving water or the fill rate is too slow
5CDrain error – the dishwasher is unable to pump water out within the expected time
LCLeak detected – the dishwasher's leak sensor in the base pan has detected the presence of water, indicating a potential leak in the system
OCOver-level water error – the dishwasher has detected that the water level inside the tub is higher than expected, indicating a fill valve that won't shut off or drain that is too slow
E112The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E648The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E703The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E521The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply

About the Author

Technical Review Team

Reviewed by certified appliance technicians with 10+ years of Samsung repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.