E792Samsung Dishwasher
Samsung Dishwasher Error E792 – Meaning, Causes & How to Fix
The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked.
Medium Severity
Low
Medium
High
Critical
Expert Verified
Reviewed by a Certified Electrical Engineer & Licensed Technician
Ad Space – header
Official Meaning
The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked.
Real-World Causes
- 1Kinked or bent hoses restricting water flow
- 2Blocked drain pump or hose
- 3Faulty valve solenoid
- 4Water supply valves not fully open
- 5Low water pressure in plumbing system
Symptoms
Look for these signs to confirm error E792 on your Samsung Dishwasher:
- Slow filling or draining
- Machine pauses and displays error
- Appliance stops mid-cycle
- Clicking sounds as relays activate
Ad Space – mid-content
DIY Fix (Safe)
- 1Verify household water and power supply
- 2Inspect hoses and filters for blockages
- 3Restart appliance after disconnecting power for 5 minutes
- 4Clean accessible filters and sensors
- 5Run diagnostic mode if available
Professional Action Required
- 1Test valves, sensors, and motors with multimeter
- 2Inspect wiring harness and connectors
- 3Replace defective pumps, motors, or sensors
- 4Check control board relays
- 5Replace electronic control board if failure confirmed
Ad Space – after-fix
Additional Context
Frequently Asked Questions
What does Samsung Dishwasher error E792 mean?
The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked.
What causes Samsung Dishwasher E792 error?
Common causes include: Kinked or bent hoses restricting water flow, Blocked drain pump or hose, Faulty valve solenoid.
How do you fix Samsung Dishwasher error E792?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.
Related Error Codes
Other Samsung Dishwasher Errors
4CWater supply error – the dishwasher is not receiving water or the fill rate is too slow
5CDrain error – the dishwasher is unable to pump water out within the expected time
LCLeak detected – the dishwasher's leak sensor in the base pan has detected the presence of water, indicating a potential leak in the system
OCOver-level water error – the dishwasher has detected that the water level inside the tub is higher than expected, indicating a fill valve that won't shut off or drain that is too slow
E590The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E556The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E560The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E25The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
About the Author
Technical Review Team
Reviewed by certified appliance technicians with 10+ years of Samsung repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.