E995Samsung Washer
Samsung Washer Error E995 – Meaning, Causes & How to Fix
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
Medium Severity
Low
Medium
High
Critical
Expert Verified
Reviewed by a Certified Electrical Engineer & Licensed Technician
Ad Space – header
Official Meaning
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
Real-World Causes
- 1Clogged inlet filter screens
- 2Water supply valves not fully open
- 3Sensor damaged by moisture or mineral buildup
- 4Low water pressure in plumbing system
- 5Faulty valve solenoid
Symptoms
Look for these signs to confirm error E995 on your Samsung Washer:
- Clicking sounds as relays activate
- Machine pauses and displays error
- Error appears at start of cycle
- Slow filling or draining
Ad Space – mid-content
DIY Fix (Safe)
- 1Verify household water and power supply
- 2Inspect hoses and filters for blockages
- 3Restart appliance after disconnecting power for 5 minutes
- 4Clean accessible filters and sensors
- 5Run diagnostic mode if available
Professional Action Required
- 1Test valves, sensors, and motors with multimeter
- 2Inspect wiring harness and connectors
- 3Replace defective pumps, motors, or sensors
- 4Check control board relays
- 5Replace electronic control board if failure confirmed
Ad Space – after-fix
Additional Context
Frequently Asked Questions
What does Samsung Washer error E995 mean?
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
What causes Samsung Washer E995 error?
Common causes include: Clogged inlet filter screens, Water supply valves not fully open, Sensor damaged by moisture or mineral buildup.
How do you fix Samsung Washer error E995?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.
Related Error Codes
Other Samsung Washer Errors
4EThe control board detected insufficient water entering the tub during the fill cycle
5EThe washer failed to drain water from the tub within the allotted drain cycle time
UEThe washer detected an unbalanced load during the spin cycle
dEThe washer detected that the door is not properly closed or the door lock mechanism has failed to engage
E361The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E916The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E970The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E405The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
About the Author
Technical Review Team
Reviewed by certified appliance technicians with 10+ years of Samsung repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.