E116Siemens Washer
Siemens Washer Error E116 – Meaning, Causes & How to Fix
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
Medium Severity
Low
Medium
High
Critical
Expert Verified
Reviewed by a Certified Electrical Engineer & Licensed Technician
Ad Space – header
Official Meaning
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
Real-World Causes
- 1Water supply valves not fully open
- 2Clogged inlet filter screens
- 3Loose wiring harness
- 4Low water pressure in plumbing system
- 5Electronic control board failure
Symptoms
Look for these signs to confirm error E116 on your Siemens Washer:
- Clicking sounds as relays activate
- Appliance stops mid-cycle
- Slow filling or draining
- Machine pauses and displays error
Ad Space – mid-content
DIY Fix (Safe)
- 1Verify household water and power supply
- 2Inspect hoses and filters for blockages
- 3Restart appliance after disconnecting power for 5 minutes
- 4Clean accessible filters and sensors
- 5Run diagnostic mode if available
Professional Action Required
- 1Test valves, sensors, and motors with multimeter
- 2Inspect wiring harness and connectors
- 3Replace defective pumps, motors, or sensors
- 4Check control board relays
- 5Replace electronic control board if failure confirmed
Ad Space – after-fix
Additional Context
Frequently Asked Questions
What does Siemens Washer error E116 mean?
The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply.
What causes Siemens Washer E116 error?
Common causes include: Water supply valves not fully open, Clogged inlet filter screens, Loose wiring harness.
How do you fix Siemens Washer error E116?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.
Related Error Codes
Other Siemens Washer Errors
E387The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E982The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E803The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E634The appliance control system detected a condition indicating drain system failure – water cannot be removed properly
E759The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E209The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E239The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
E138The appliance control system detected a condition indicating water supply error – the appliance is not receiving adequate water supply
About the Author
Technical Review Team
Reviewed by certified technicians with 10+ years of Siemens repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.