ErrorFindly
E146Siemens Washer

Siemens Washer Error E146 – Meaning, Causes & How to Fix

The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating.

Real-World Causes

  • 1Kinked or bent hoses restricting water flow
  • 2Blocked drain pump or hose
  • 3Faulty valve solenoid
  • 4Loose wiring harness
  • 5Clogged inlet filter screens

Symptoms

Look for these signs to confirm error E146 on your Siemens Washer:

  • Machine pauses and displays error
  • Slow filling or draining
  • Appliance stops mid-cycle
  • Clicking sounds as relays activate

DIY Fix (Safe)

  1. 1Verify household water and power supply
  2. 2Inspect hoses and filters for blockages
  3. 3Restart appliance after disconnecting power for 5 minutes
  4. 4Clean accessible filters and sensors
  5. 5Run diagnostic mode if available

Professional Action Required

  1. 1Test valves, sensors, and motors with multimeter
  2. 2Inspect wiring harness and connectors
  3. 3Replace defective pumps, motors, or sensors
  4. 4Check control board relays
  5. 5Replace electronic control board if failure confirmed

Additional Context

Load Type
Any load type
Drain Related
Depends on cycle stage
Sensor Issues
Incorrect readings possible if sensors are blocked

Frequently Asked Questions

What does Siemens Washer error E146 mean?
The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating.
What causes Siemens Washer E146 error?
Common causes include: Kinked or bent hoses restricting water flow, Blocked drain pump or hose, Faulty valve solenoid.
How do you fix Siemens Washer error E146?
Start with these DIY steps: Verify household water and power supply. Inspect hoses and filters for blockages. If the error persists, professional service may be needed.

Related Error Codes

Other Siemens Washer Errors

E387The appliance control system detected a condition indicating door or lid lock error – appliance cannot confirm door is securely locked
E982The appliance control system detected a condition indicating sensor calibration error – sensor values conflict with expected parameters
E803The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E634The appliance control system detected a condition indicating drain system failure – water cannot be removed properly
E275The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E887The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E964The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating
E327The appliance control system detected a condition indicating fan motor failure – cooling or ventilation fan not operating

About the Author

Technical Review Team

Reviewed by certified technicians with 10+ years of Siemens repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.