ErrorFindly
F89Whirlpool Refrigerator

Whirlpool Refrigerator Error F89 – Meaning, Causes & How to Fix

The appliance detected the thermistor reading is outside expected range.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance detected the thermistor reading is outside expected range.

Real-World Causes

  • 1Compressor failure or overload
  • 2Thermostat or temperature sensor malfunction
  • 3Defrost system failure (heater, timer, or thermostat)
  • 4Evaporator or condenser fan motor failure
  • 5Refrigerant leak
  • 6Sealed system blockage
  • 7Control board malfunction

Symptoms

Look for these signs to confirm error F89 on your Whirlpool Refrigerator:

  • Refrigerator not cooling or freezing properly
  • Excessive frost buildup in freezer
  • Water leaking inside or underneath the unit
  • Loud or unusual noises from compressor or fans
  • Temperature fluctuating or too warm
  • Error code displayed on control panel

DIY Fix (Safe)

  1. 1Check and adjust temperature settings to recommended levels
  2. 2Clean condenser coils (usually at the back or bottom)
  3. 3Ensure door seals are clean and closing tightly
  4. 4Defrost manually if excessive ice buildup is present
  5. 5Verify the unit has proper clearance for air circulation
  6. 6Reset the appliance by unplugging for 5 minutes

Professional Action Required

  1. 1Test compressor relay and overload protector
  2. 2Check refrigerant levels and inspect for leaks
  3. 3Replace defrost timer, heater, or bi-metal thermostat
  4. 4Test evaporator and condenser fan motors
  5. 5Inspect control board and replace if diagnostics confirm failure

Additional Context

Compartment
Error may affect refrigerator, freezer, or both compartments
Temperature Range
Optimal fridge: 2-4°C (35-39°F), freezer: -18°C (0°F)
Sensor Issues
Faulty sensors may display incorrect temperature readings

Frequently Asked Questions

What does Whirlpool Refrigerator error F89 mean?
The appliance detected the thermistor reading is outside expected range.
What causes Whirlpool Refrigerator F89 error?
Common causes include: Compressor failure or overload. Thermostat or temperature sensor malfunction. Defrost system failure (heater, timer, or thermostat). Cooling system and defrost issues are the most common refrigerator problems.
How do I fix Whirlpool Refrigerator error F89?
Start with these steps: Check and adjust temperature settings to recommended levels. Clean condenser coils (usually at the back or bottom). If the error persists, a technician should inspect the compressor and defrost system.

Related Error Codes

Other Whirlpool Refrigerator Errors

F01The appliance detected the thermistor reading is outside expected range
F02The appliance detected the heating element circuit is malfunctioning
F03The appliance detected water level exceeded safety threshold
F04The appliance detected water level exceeded safety threshold
F08The appliance detected the thermistor reading is outside expected range
F17The appliance detected the thermistor reading is outside expected range
F80The appliance detected the thermistor reading is outside expected range
F81The appliance detected the thermistor reading is outside expected range

About the Author

Technical Review Team

Reviewed by certified appliance technicians with 10+ years of Whirlpool repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.