ErrorFindly
F106Whirlpool Washer

Whirlpool Washer Error F106 – Meaning, Causes & How to Fix

The appliance detected the control cannot communicate with the drive motor.

Medium Severity
Low
Medium
High
Critical

Expert Verified

Reviewed by a Certified Electrical Engineer & Licensed Technician

Official Meaning

The appliance detected the control cannot communicate with the drive motor.

Real-World Causes

  • 1Faulty electronic control board
  • 2Low household water pressure
  • 3Mechanical obstruction in pump or motor
  • 4Failed sensor component
  • 5Loose wiring harness

Symptoms

Look for these signs to confirm error F106 on your Whirlpool Washer:

  • Look for these signs to confirm F106 on your
  • Whirlpool WFW5620HW:
  • Water remaining inside appliance
  • Display immediately shows error code

DIY Fix (Safe)

  1. 1Power cycle the appliance for 5 minutes
  2. 2Inspect hoses, filters, and accessible sensors
  3. 3Verify household power and water supply conditions
  4. 4Run appliance diagnostic mode if available

Professional Action Required

  1. 1Test electrical components with multimeter
  2. 2Inspect wiring harness and connectors
  3. 3Replace defective sensor, pump, motor, or control board if required

Additional Context

Load Type
Any load

Frequently Asked Questions

What does Whirlpool Washer error F106 mean?
The appliance detected the control cannot communicate with the drive motor.
What causes Whirlpool Washer F106 error?
Common causes include: Faulty electronic control board, Low household water pressure, Mechanical obstruction in pump or motor.
How do you fix Whirlpool Washer error F106?
Start with these DIY steps: Power cycle the appliance for 5 minutes. Inspect hoses, filters, and accessible sensors. If the error persists, professional service may be needed.

Related Error Codes

Other Whirlpool Washer Errors

F01The appliance detected water level exceeded safety threshold
F02The appliance detected sensor readings conflict with expected parameters
F03The appliance detected cooling or ventilation fan is not operating
F04The appliance detected the appliance cannot confirm the door is locked
F14The appliance detected cooling or ventilation fan is not operating
F24The appliance detected cooling or ventilation fan is not operating
F26The appliance detected cooling or ventilation fan is not operating
F27The appliance detected cooling or ventilation fan is not operating

About the Author

Technical Review Team

Reviewed by certified appliance technicians with 10+ years of Whirlpool repair experience. Every error code is verified against manufacturer service manuals and real-world repair data.